Car and engine specification:
BMW M135i M Performance F40 xDrive type F1H (5 door), 07/19=>
2.0l Turbo 225 kW (B48A20E, with GPF)
REMUS RACING-cat-back-system
- 100% stainless steel
- Powerful sound
- Performance and torque increase
- Light weight construction
- Made in Austria
INFOBOX:
- Axle-back-system L/R: 754019 0000 + 754019 1500 + tail pipe set! The original exhaust must be cut! No rear skirt modifications required!
- RACING-Cat-back-system L/R: 754019 1000 (No EC type approval) + 754019 0000 + 754019 1500 or 754519 1500 (No EC type approval) + tail pipe set! No vehicle modifications required!
- The use of racing products and products which do not have EC approval is generally not permitted on public roads.
- When installing REMUS axle-back and cat-back or catalyst delete tubes on vehicles which are used for closed road driving, it is advisable to tune the ECU for a maximum gain in performance and to ensure that the CEL does not come on.
| Part no. | Description |
| 754019 1000 | Non-resonated RACING Cat-back-section (GPF replacement section) Original tube Ø 70 mm – REMUS tube Ø 70 mm No EC type approval |
| 754019 0000 | Connection tube for mounting of the sport exhaust |
| 754019 1500 | Sport exhaust centered for L/R system (without tail pipes, without connecting tube) with 1 integrated valve, incl. EC type approval The activation of the valve is carried out using the original actuator via the vehicle onboard electronics. Original tube Ø 70 mm – REMUS tube Ø 70 mm |
| 754519 1500 | RACING sport exhaust centered for L/R system (without tail pipes, without connecting tube) with 1 integrated valve, No EC type approval The activation of the valve is carried out using the original actuator via the vehicle onboard electronics. Original tube Ø 70 mm – REMUS tube Ø 70 mm |
| Choose from following tail pipe package: | |
| 0026 70SG | Stainless steel tail pipe set 2 tail pipes Ø 102 mm angled, straight cut, chromed, with adjustable spherical clamp connection |
| 0026 70S | Stainless steel tail pipe set 2 tail pipes Ø 102 mm angled, rolled edge, chromed, with adjustable spherical clamp connection |
| 0026 70CS | Carbon tail pipe set 2 tail pipes Ø 102 mm angled/angled, Titanium internals, with adjustable spherical clamp connection |
| 0026 70CSS | Carbon tail pipe set 4 tail pipes Ø 102 mm angled (shorter length 145 mm), Titanium internals, with adjustable spherical clamp connection |
| 0026 70SSR | Stainless steel tail pipe set 2 tail pipes Ø 102 mm angled/angled, rolled edge, chromed, with adjustable spherical clamp connection, “R“ Logo |
DISCLAIMER
The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.
The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.
Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.
For more information, please contact us at:
Phone:
+65 6475 5775
E-mail:
info@autoclinicgroup.com.sg
Contact Form:
https://autoclinicgroup.com/contact-us/
